Audi RNS-E Specifikace stáhnout pdf (Strana 6)

Version 29.11.2012 C1-RNSE

Page5

3.2. Connections to head-unit

Remove the head-unit from the dash-board.

Plug female 32pin AMP-connector of C1C-RNSE into male 32pin AMP-socket of head-

unit.

Note: If the 32pin AMP-socket of the head-unit is already occupied, the vehicle probably has

a factory rear-view camera or a factory TV-tuner. In case of a factory tuner, it must be

uninstalled: disconnect the female 32pin AMP-connector of the factory harness and

disconnect all wires from the factory TV-tuner. In case of a factory rear-view camera you

have ordered/received the wrong product, call for support.

Connect the loose red cable to +12V battery, the loose black cable to ground, the

loose yellow cable to CAN-HIGH and the loose blue cable to CAN-LOW of the vehicle.

No liability for vehicle wire colors and pin definition! Possible changes by the vehicle

manufacturer. The given information must be verified by the installer.

Pin of Quadlock

Assignment

Pin 15

+12V Permanent

Pin 12

Ground

Pin 9

CAN HIGH 9

Pin 10

CAN LOW

Quadlock male of vehicle

1 2 3 4 5 6 7 8 9 10 11

Žádné komentáře

Audi RNS-E Specifikace Strana 6